16" Rear Wheel Cover Set Chrome

16" chrome rear wheel cover set fits between disc rotor and sprocket, for 1973-1984 FLH spoke wheel models.
Set is fastened with 5 bolts. Wheel cover will fit rims/wheels with Side Valve tube type standard width 3-1/2" rims only. When used with a center valve tube, the rim cover must be removed to be filled with air. For hubs with 27mm offset on each side. *NOTE: The customer must drill a 5/16" hole for the valve stem. Use 1/8" drill for pilot hole after locating the "5" mounting holes. Use with suggested metal stem inner tube. The hubs are drilled 7/16" on the disc rotor side and 3/18" on the sprocket side. For center valve use tubeless tire valve stem to fill hole, for steel or ally hub applications. *NOTE: Front wheel must have (2) 5-hole flanges. *NOTE: Side Valve stem hole is 18.5mm for metal stem tubes with nut. For installation of wheel cover set on 1973-1984 FL Rear wire rotor side wheels, cover with pentagon shape hole and 5 lug bolt holes will be secured with 5 7/16" x 14 carriage bolts. (This is the rotor side.)