*UPDATE Replica Flatside Cam Cover Chrome

Replica chrome cam cover is flatside style with bushings installed for Shovelhead models.
Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink, check screw head before installation. *NOTE: Check oil passage (drilled hole) into bronze bushings, either on existing bushings or when replacing bushings. *NOTE: Chrome on sand cast material will show some surface imperfections! Generator holes for 32E 6 volt 2 brush generators are 1/4" on Pre-1957 models and 5/16" on 1958-1969 models.