Factory Sample 18" Spring Fork Assembly Chrome

Chrome spring fork assembly is completely assembled with inner springs. Fork has a 7/8" non removable stem. Axle not included.
*NOTE: Rocker set not included, must order separately as required. For 45 Solo applications rockers with 3/8" axle holes are mounted on the inside of the fork legs using 7/16" threaded stud. For 1941-57 Servi-Car applications offset rockers are mounted on the outside of the fork with a bolt on 5-bolt lug star hub wheel and studs that are 1/2". Rocker mount holes are drilled to 7/16" but must be enlarged to 1/2" for off set rockers The distance between the rockers measures 6.5" This item replicates the center section of the stock bars with the upward pointing stumps. It will also fit aftermarket custom Spring Forks with an offset neckpost that was designed to use a stock type triple clamp with holes at 4-3/4" on center. Use these with reproduction Stellings & Hellings risers available in inline or offset configurations. *NOTE: We measure from the top of the rear leg (tube), to the front axle center line. Factory sample are brand new pre-production parts but have in the finished surface. Check threaded