74" Knucklehead Engine Assembly
Retail Price: $10,546.07
VT No
10-1755
Replica 74" long block Knucklehead with polished rocker boxes, parkerized valve cover cups, a Linkert 4 bolt manifold, the motor sprocket and an 18mm sparking plug set. Fully assembled and tested for oil pressure.
Replica 74" long block Knucklehead with polished rocker boxes, parkerized valve cover cups, a Linkert 4 bolt manifold, the motor sprocket and an 18mm sparking plug set. Fully assembled and tested for oil pressure.
Includes Burkhardt offset magneto installed. Unit features replica crank cases, overhead oiler provision from timing cover, cast iron type flywheel assembled with stock rods and Torrington rollers with steel cages, a valve train with tappet assemly that features Sifton lighting cam, pushrods, chrome pushrods and a smooth cover. Replica cast iron cylinders are fitted with 8.5:1 pistons and Hasting rings, replica cast iron oil pump with early style iron cover and distributor post guide slot. Includes black M-74 Linkert carburetor. *NOTE: M-74 Linkert carburetor is pre-run, installed and tested within our Motor Shop. Running! Manufacturer's Bill of Sale supplied.
Includes Burkhardt offset magneto installed. Unit features replica crank cases, overhead oiler provision from timing cover, cast iron type flywheel assembled with stock rods and Torrington rollers with steel cages, a valve train with tappet assemly that features Sifton lighting cam, pushrods, chrome pushrods and a smooth cover. Replica cast iron cylinders are fitted with 8.5:1 pistons and Hasting rings, replica cast iron oil pump with early style iron cover and distributor post guide slot. Includes black M-74 Linkert carburetor. *NOTE: M-74 Linkert carburetor is pre-run, installed and tested within our Motor Shop. Running! Manufacturer's Bill of Sale supplied.
FITS | FL 1941-1947 EL 1941-1947 |
|---|
| UOM | 1 - KIT |
|---|---|
| Manufacturer | Motorshop |
| Origin | Imported |
| Tech Note | °Replica V-Twin Manufactoring Knucklehead Engine shipped fully assembled with carburetor and shop tested for oil pressure °Crank Case Replica V-Twin Manufactoring with authentic castprofiles. Including relay and number bosses °Rocker Boxes with polished finish and overhead oiler provision from timing cover °Heads newly casted knuckleheads with parkerized lower valvecover cups and tops °Flywheels are cast iron type, assembled with stock rods andtorrington rollers with steel cages at sprocket and pinion shaft ends °Valve Train includes solid tappet assemblies with sifton lightning cam, sifton solid stock pushrods and chrome pushrod covers °Cast Iron Cylinders fitted with 8.5:1 cast pistons and hasting rings °Oil Pump V-Twin Replica cast iron °Distributor mechanical advance with corresponding relay mount with distributor post guide slot °Intake Manifold Linkert style 4 bolt manifold with plumber style nuts and brass steals |
Related Products
