18" Spring Fork Assembly Chrome

Retail Price: $1,214.21
VT No
49-2413
Unit includes inner and outer springs, chrome front and rear legs, inside rockers for a 3/8" axle and internal brake wheel with all studs and bushings, spring rods with bushings.
Unit includes inner and outer springs, chrome front and rear legs, inside rockers for a 3/8" axle and internal brake wheel with all studs and bushings, spring rods with bushings.
For use with a 7/8" neck. Top clamp, neck races, and cone nut are not included. Some assembly may be required. 1" tubes on rear legs are tapped 3/4"-16 to accept threaded riser bushing set, with this installed the builder can use a triple tree without ears and choice of post riser set. The 45 rockers are mounted in board of the fork legs and accept a 3/8" diameter axle. The distance between the rockers measure 6.5". These forks are replicas of the stock units with electric welded and brazed construction and will accept all original style components and accessories for the detailed replica look. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs. *NOTE: We measure from the top of the rear leg (tube), to the front axle center line.
More Information

FITS

WL 1936-1952
More Information
UOM1 - EA
Measurements
Neck Stem: 7/8"Legnth: 18"
ManufacturerV-Twin
OriginImported
2021 Catalog Pages779
Replacement Items49-0235 - Rebuild Kit
13-1937 - Spring Fork Outer Springs
7706-2 - Cadmium Spring Rod Bushing
Tech Note
Unit is unpolished at the rear fork stem cross plate and at the front spring fork rod forging.
*NOTE: 45" Spring Fork rockers are mounted to the inside of the fork and utilize a 3/8" axle. 45" Servi-Cars, 1947-1957,use Big Twin rockers on the outside of the fork.
How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits, to the axle position. This is the effective length, as it is the legnth
from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
height. This Spring Fork assembly accepts a 3/4" axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1" stem utilized tapered bearings for
ease of installation.
Copyright © 2019-present V-Twin Mfg.