WR Linkert Intake Manifold
Retail Price: $131.13
VT No
35-0286
OEM No: 27020-40
Four bolt WR intake manifold for Linkert carburetor is cast iron with zinc plating.
Four bolt WR intake manifold for Linkert carburetor is cast iron with zinc plating.
NOTE: For WR and K use, order correct manifold nuts and seals separately. Installation requires the nipples to be screwed into the cylinder depth so that the manifold alignment is correct. For the float arm installation, the center prong of the float arm should have .003" of clearance, in order for the arm and needle to move freely.
NOTE: For WR and K use, order correct manifold nuts and seals separately. Installation requires the nipples to be screwed into the cylinder depth so that the manifold alignment is correct. For the float arm installation, the center prong of the float arm should have .003" of clearance, in order for the arm and needle to move freely.
FITS | K 1952-1956 KH 1954-1956 WR 1941-1952 |
|---|
| OEM No. | 27020-40 | |
|---|---|---|
| UOM | 1 - EA | |
| Measurements |
| |
| Manufacturer | V-Twin | |
| Origin | Imported | |
| 2025 Catalog Pages | 806 | |
| Replacement Items | 9664-8 - Parkerized Linkert Carburetor Mount Screws 7104-2 - Brass Intake Manifold Seals | |
| Tech Note | To install the WR manifold on a 45" cylinder, on W and G models, the intake manifold nipples must be replaced with #9423-1 larger nipples. Suggested to use with #35-1707 Manifold Nipple Set To be installed on WL models 0.100" must be machined from eash spigot for a total of 0.200" overall. Suggested to use with #35-1952 Intake Manifold Nut Set. |
Related Products
